Wireless MINI-PCI Products PCE-N13 Quick Start Guide Read this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and/or any of the devices it connects to.
1. Welcome Thank you for choosing Pegatron to serve your wireless needs. In no time you will enjoy wireless home and office. We hope you will have as much fun using your PCE-N13 as we had designing it. Rest assured, your Pegatron PCE-N13 is built rock-solid to ensure maximum up-time for you to stay up-and-running. If for any reason you have a problem, we stand behind our products, so you can have peace-of-mind with your current and future Pegatron purchases.
2、You will find the network controller in the device manager , right click and select update the driver shown as below 3、The driver install wizard as below , select install from the list (advanced) , click next to go on 3
、Select search the most suitable driver from these locations and click brows to locate the driver , then next 5、Choose continue go on anyway 4
6、Click complete 7、Restart the computer 5
8、The last 6
3. Software installation and setup of device (channel/operating mode/encryption/etc.) Software Installation Steps 1. Plug in the PCE-N13, then power on the computer ,you will see the “welcome use the new hardware wizard” when the OS loading complete ,please select “cancel”.
2. Open the file manager and select the software to install. 3.
4. Select “install the driver and Ralink wireless configuration program”, and click the “next step” 5.
6. Click the “install” 7.
8. Wait few minute to complete the install ,and click the “complete” 9. Open the RaUI and click the arrow to show more information.
10. Click the re-scan first ,then find your AP and select it ,and click connect button ,the wireless card will be connect to the AP. 11.
Federal Communication Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device has been designed to operate with an antenna having a maximum gain of 2.5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
