Teleadapt DeskBridge Manual 1
Notices ..................................................................................................................................... 3 Federal Communications Commission Statement ...................................................... 3 Safety Statements ................................................................................................................... 4 Regulatory Information/Disclaimers ............................................................................
Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
Safety Statements Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Teleadapt DeskBridge Configuration To access the DeskBridge configuration screen follow the steps below: 1. Connect the DeskBridge to your PC's Ethernet port 2. Set your PC's "Network Connection" properties for manual DHCP; as follows a. b. c. d. e. f. g. h. i. j.
Explanation of fields on Simple Setup page The Simple Setup page allows you to configure the wireless and Ethernet properties of the DeskBridge SSID (Service Set Identifier): This field allows you to enter the SSID of the AP you wish to connect to. Enter “ANY” to connect to any available AP. Operating Mode: This field allows you to select the operating mode for the Ethernet adapter. In Infrastructure operating mode, the DeskBridge connects to an available AP.
You save the profile of the wireless connection using the Site Survey window. You must save at least one wireless connection profile before using the Button Scan Mode. Scan Mode: This field allows you to select the scan mode for button scanning. Click the arrow to display available options.
Specification Standard Technology Data Transfer Rate Network Types Frequency Band Security Operating Distance Supported OS Antenna IEEE802.11b Direct Sequence Spread Spectrum (DSSS) 11Mbps(with automatic fallback to 5.5 2 and 1Mbps) Support Infrastructure and Ad-hoc networks 2.4GHz to 2.
