User's Manual

ManualsBrandsASUSTeK Computer ManualsComputers & AccessoriesMIMO WIRELESS ROUTER

WL-500W Wireless Router User Manual

5. Input the IP address of WL-500W in

the

Printer Name of IP Address

eld

and click

6. Select

Custom

and click

Settings.

7. S e t

P r o t o c o l

t o

L P R

a n d t y p e

LPRServer

Queue Name

eld. Click

to continue.

8. Press

to finish standard TCP/IP

port setting.

3. Select

Create a new port

and set Type

of port to

Standard TCP/IP Port

, then

click

4. Click

to setup TCP/IP port for

accessing the network printer.

Summary of content (5 pages)

PAGE 1
WL-500W Wireless Router User Manual 3. Select Create a new port and set Type of port to Standard TCP/IP Port, then click Next. 4. Click Next to setup TCP/IP port for accessing the network printer. 5. Input the IP address of WL-500W in the Printer Name of IP Address field and click Next. 6. Select Custom and click Settings. 7. S e t P r o t o c o l t o L P R a n d t y p e LPRServer in Queue Name field. Click Next to continue. 8. Press Next to finish standard TCP/IP port setting.
PAGE 2
WL-500W Wireless Router User Manual 9. Press Finish to complete the settings and return to Add Printer Wizard. 10. Install printer driver from the vendormodel list. If your printer is not in the list, click Have Disk to manually assign the location of driver. 11. Click Next to accept the default name for the printer. 12. Select Yes to print a test page. Click Next to print. 13. The installation is complete. Click Finish to quit the Add Printer Wizard.
PAGE 3
WL-500W Wireless Router User Manual 6. Setting up using ASUS utility 1) Utility Installation for WL-500W 1. Click Install ASUS Wireless Router Utilities to run the setup installation program. 2. Click Next to continue. 3. Click Next to install the utility in the designated location. 4. Select a program folder and click Next. 5. Press Finish to quit the installation program. 6. Open the EZSetup Wizard.
PAGE 4
WL-500W Wireless Router User Manual 2) EZSetup Wireless LAN setup will complete in two easy steps. First open the EZSetup utility form Start menu, then push the EZSetup button on the rear panel for 3 seconds. Push EZSetup over 3 sec. and release. 1) If the setup button is pushed without running the EZsetup wizard utility, the PWR indicator will flash and Internet connections will pause for a short period but will then return to normal operation without change.
PAGE 5
WL-500W Wireless Router User Manual 4 If you need to configure the ISP settings for your wireless router, select Configure ISP settings, click Next and follow the instructions to complete the settings. 5 Setup is complete, press Print/Save Wireless LAN Settings button for future reference. Click Finish to exit the EZSetup utility.