ASUS WL-520g Wireless Router (For 802.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Company Address: General Telephone: General Fax: Web Site Address: General Email: 15 Li-Te Road, Peitou, Taipei 112 +886-2-2894-3447 +886-2-2894-7798 www.asus.com.tw info@asus.com.
Table of Contents 1. Introduction .......................................................................................... 5 Overview ................................................................................................ 5 System Requirements ........................................................................... 5 The Product Package ....................................................................... 5 Features ............................................................................
1. Introduction Chapter 1 - Introduction 1. Introduction Overview Thank you for purchasing the ASUS Wireless Router. The ASUS Wireless Router, WL-520g, complies with IEEE 802.11g and 802.11b standards. The 802.11g is as extension to 802.11b (used in majority of wireless LANs today) that broadens 802.11b’s data rates to 54 Mbps within the 2.4 GHz band using OFDM (orthogonal frequency division multiplexing) technology. The 802.11g allows backward compatibility with 802.
Chapter 1 - Introduction 1. Introduction Features 125 High Speed Mode The WL-520g wireless router uses the 802.11g OFDM standard to allow fast 54Mbps wireless data transfers while remaining fully compatible with previous 802.11b devices. With “Afterburner” technology, WL-520g can boost wireless transfer speeds by 35% compared with standard 802.11g speeds. (Afterburner support is also required on client side.
Chapter 1 - Introduction 1. Introduction The ASUS Wireless Family The ASUS Wireless family contains a several wireless network solutions for 802.11g & 802.11b wireless local area networks in the home or office. Access Point or Client The ASUS WLAN 802.11g Access Point (WL-300g) creates a wireless network using the IEEE 802.11g and 802.11b wireless standards. The ASUS 3 in 1 Pocket Access Point (WL-330g) creates a wireless network using the IEEE 802.11g/b wireless standards.
Chapter 1 - Introduction 1. Introduction PCI Client The ASUS WLAN PCI Card (WL138g) is a wireless LAN adapter that fits into a standard PCI slot in a desktop PC and creates a wireless network using the IEEE 802.11g/b wireless standards. USB Access Point or Client USB Client The ASUS USB Wireless LAN Adapter (WL-160g) creates a wireless network using the IEEE 802.11g/b wireless standards and connects to any computer using USB2.0 connectivity. 802 .
Chapter 1 - Introduction 1. Introduction Network Topology The settings that you need to perform will vary depending on the role that your ASUS Wireless Router will play. Network Backbone No software setting is necessary in the ASUS Wireless Router. Wireless ASUS Wireless Router LAN Wireless Client Wireless Client Wired Client In this topology, the wireless router connects your wired and wireless devices together to form a local area network (LAN), as shown.
Chapter 1 - Introduction 1. Introduction Agent to an ISP Internet Service Provider Internet ADSL or Cable Modem Wireless WAN ASUS Wireless Router Wireless Client LAN Wireless Client Wired Client In this topology, the wireless router is not only a backbone of your LAN but also an agent to your Internet Service Provider (ISP). You may use an ADSL or Cable modem to communicate with your ISP.
Chapter 1 - Introduction 1. Introduction Agent to Another Network Wireless Network Backbone WAN ASUS Wireless Router LAN Wireless Client Wireless Client Wired Client In this topology, the wireless router is an agent between your LAN and another network. Use a network cable with one end connected to the WAN port on the wireless router and the other to the other network as shown above.
Chapter 1 - Introduction 1. Introduction LED Indicators The LEDs on the front of the ASUS Wireless Router display the status of the ASUS Wireless Router. PWR (Power) Off No power On System ready Flashing-slow Firmware upgrade failed Flashing-quick EZsetup processing Note: If the setup button is pushed without running the EZsetup wizard utility, the PWR indicator will flash and Internet connections will pause for a short period but will then return to normal operation without changes.
Chapter 2 - Installation 2. Installation Procedure Follow these steps to install the ASUS Wireless Router. 2. Installation 1. Determine the best location for the ASUS Wireless Router. Keep in mind the following considerations: • The length of the Ethernet cable that connects the ASUS Wireless Router to the network must not exceed 100 meters.
Chapter 2 - Installation Connections Connect your ADSL Modem and Wireless Router as shown in the illustration. A LAN cable must be connected between the LAN port on the ADSL and the WAN port on the Wireless Router. Wireless Router ADSL Modem 2. Installation Power Phone LAN Power LAN Telephone Jack Connect the Wireless Router to your computer through the LAN port.
Chapter 3 - Software Configuration 3. Software Configuration Configuring the ASUS Wireless Router 3. Utilities The ASUS Wireless Router can be configured to meet various usage scenarios. Some of the factory default settings may suit your usage; however, others may need changing. Prior to using the ASUS Wireless Router, you must check the basic settings to guarantee it will work in your environment. Configuring the ASUS Wireless Router is done through a web browser.
Chapter 3 - Software Configuration Setting IP address for Wired or Wireless Connection Get IP Automatically The ASUS Wireless Router incorporates a DHCP server so the easiest method is to set your PC to get its IP address automatically and reboot your computer. So the correct IP address, gateway, DNS (Domain Name System Server) can be obtained from the ASUS Wireless Router. 3. Utilities Note: Before rebooting your PC, the ASUS Wireless Router should be switched ON and in ready state.
Chapter 3 - Software Configuration Installing the ASUS Wireless Router Utilities (1) Select a language and click Install ASUS Wireless Router Utilities. (2) Click Next after reading the welcome screen. (3) Click Yes after reading the license agreement. (4) Click Next to accept the default destination folder or enter another. (5) Click Next to accept the default program folder or enter another. (6) Click Finish when setup is complete. ASUS Wireless Router 3.
Chapter 3 - Software Configuration Using the Wireless Router for the First Time 1. ASUS Wireless Router Utilities Run Device Discovery from “ASUS Utility” in Windows Start Programs. 2. Connect to the ASUS WLAN Web Manager Run the ASUS WLAN Device Discovery from the Start menu and click Config when the device is found. 3. Utilities Add 192.168.1.1 in the Exceptions box if you are using a proxy server (Microsoft® Internet Explorer).
Chapter 3 - Software Configuration User Name & Password Once connected, a window will ask for the “User name” and “Password” in order to log in. The factory default values are “admin” and “admin”. Note: If you cannot find any the ASUS Wireless Routers due to a problem in the IP settings, push and hold the “Restore” button over five seconds to restore factory default settings. Home Page 3. Utilities After logging in, you will see the ASUS Wireless Router home page.
Chapter 3 - Software Configuration Commonly used features Setting up a server in your LAN 1. Select Virtual Server under “NAT Setting” 2. (1) Enable Virtual Server (2) Choose Application (e.g. FTP) (3) Enter data in the fields Port Range: Port connected to WAN 3. Utilities Local IP: IP address of the FTP Server Local Port: Oort of the FTP Server Protocol:Protocol Type (4) Click Add button to add settings (5) Click Finish button 3. Click Save&Restart”.
Chapter 3 - Software Configuration Setting up as switching Hub and pure AP (no IP sharing NAT) 1. Connect the LAN port from a DSL or Cable modem to one of the LAN ports on the wireless router. DSL or Cable Modem ASUS Wireless Router 3. Utilities 2. Select DHCP Server under “IP Config” 3. Turn OFF the “DHCP Server” function 4. Click Finish. 5. Click Save&Restart”.
Chapter 3 - Software Configuration Setting up net meeting, MSN, on-line gaming, and remote control programs 1. Open My Network Places from Windows “start”. 2. Click View network connections. 3. Utilities 3. Right-click Local Area Connection and select “Properties”. 4.
Chapter 3 - Software Configuration Setting up net meeting, MSN, on-line gaming, and remote control programs (Cont.) 3. Utilities 5. Enter TCP/IP settings as shown here. 6. Choose “Virtual DMZ” from “NAT Setting” in WL-520g settings 8. Click Save&Restart”. 7. Enter the IP address and click Finish.
Chapter 3 - Software Configuration Setting up DDNS 1. Choose “Miscellaneous” from IP Config directory 2. If you do not have Dynamic-DNC, enable the DDNS Client. Then, choose one server from 2 and click Free Trial to apply for a new Dynamic-BNC. 3. After clicking Free Trail, this web page will open. 3. Utilities 4. Read the policy and select “I have read...”. 5. Enter the user name you want (e.g.WL-520g) 6. Enter an e-mail address for a activation letter. 7. Enter the password of your account 8.
Chapter 3 - Software Configuration Setting up DDNS (Cont.) 12. Press the “login” to login your account 13. Enter your “Username” and “Password” that you used to apply for the account and click Login. 14. After you login, you will see this message. 3. Utilities 15. Select Services tab. 16. Click Add Host next to Dynamic DNS to add your own DDNS. 17. Enter the “Hostname” and then click Add Host. 18. You will see this message when your Hostname is successfully created.
Chapter 3 - Software Configuration Setting up DDNS (Cont.) 19. Enter your account data. The user name password is the account you created when applying for DDNS. Then click Finish. 20. Click Save&Restart. 3. Utilities 21. Verify the DDNS is working. Click Windows start and select Run... 22. Type in cmd and click OK to open the DOS console. 23. Type ping wl-520g.dyndns.org (use your hostname). If you can see a reply from the hostname, the DDNS is working correctly.
Chapter 3 - Software Configuration Setting up WDS 1. Choose Bridge under “Wireless”. 2. Select AP mode as WDS Only. If you want to use both AP and WDS, you can choose Hybrid mode. 3. Utilities 3. If you selected WDS or Hybrid mode, you will see a message telling you to choose a fixed channel for WDS. 4. Select a fixed channel for WDS 5. Select Yes or No to “Connect to APs in Remote Bridge List” to connect to other APs which are connected by the APs in you list. 6.
Chapter 3 - Software Configuration 3.
Appendix Troubleshooting The ASUS Wireless Router is designed to be very easy to install and operate. However, if you experience difficulties, use the information in this chapter to help diagnose and solve problems. If you cannot resolve a problem, contact Technical Support, as listed on the front of this manual.
Appendix Problem The ASUS Wireless Router Web Manager still cannot find or connect to the ASUS Wireless Router after verifying the IP address and LAN cable, changes cannot be made, or password is lost. Solution In case the ASUS Wireless Router is inaccessible, you can restore the ASUS Wireless Router’s factory default settings. Use a straightened paper clip to press the button located in the hole labeled “Restore ” on the back of the ASUS Wireless Router and keep it depressed over 5 seconds.
Appendix Problem My 802.11b PC Card will not associate with the ASUS Wireless Router. Solution Follow these steps: 1. Try to bring the devices closer together; the PC Card may be out of range of the ASUS Wireless Router. 2. Confirm that the ASUS Wireless Router and PC Card have the same SSID. 3. Confirm that the ASUS Wireless Router and PC Card have the same Encryption settings, if enabled. 4. Confirm that the ASUS Wireless Router’s Air and Link LEDs are solid green. 5.
Appendix Problem I cannot find the ASUS Wireless Routers using the ASUS Wireless Router Discovery. Solution To configure the ASUS Wireless Router through a wireless LAN card, your computer must be in the same subnet of the ASUS Wireless Router. You cannot find the ASUS Wireless Routers with subnet different from your computer within the same gateway. You must change your computer to the same subnet as the ASUS Wireless Router. The factory default subnet of the ASUS Wireless Router is "192.168.1.1".
