Installation Manual

3. Hardware Installation Guide

All data stored on the hard disk(s) will be erased and CANNOT be recovered. Please back up all important data before

initializing the system.

Tools Needed for Hard Disk Installation

 Phillips head screwdriver

 At least one 2.5 or 3.5 inch SATA hard disk. (For a list of compatible hard disks, please see

http://www.asustor.com/service/hd?id=hd)

Hard Disk Installation

1. Remove the front panel as shown in the image below.

AS3302T AS3304T

2. Using the latch, gently pull the disk tray out of the disk bay.

AS3302T AS3304T

3. Mount the hard disk to the disk tray.

To install a 3½ " hard drive, please remove the two rails on both sides of the hard drive tray. Place the hard drive

into the tray, align and insert the rails to secure the hard drive and insert it into the NAS.