User Guide

IronWolf Health Management: The Seagate IronWolf Health Management function can provide

more detailed detection information for IronWolf series hard disks. Before the possibility of a hard

disk error occurring, a notification or warning message will be issued.

If you are using a Seagate IronWolf or IronWolf Pro series hard disk with a capacity of over or

equal to 4TB, you only need to navigate to [Storage Manager] → [Disk] → [Disk Doctor] and the

[IronWolf Health Management] window will appear. You can use this function to schedule or

immediately carry out a scan.

After using IronWolf Health Management to scan your hard disks, the results will either be shown

as “healthy” or a numerical output code. Please see the chart below to see the suggestions

represented by the codes.

Output

Codes from

IronWolf

Health

Management

IronWolf

Health

Test Result

Suggestion

100

Notification

Abnormally high operating temperature has been detected.

Please ensure rear ventilation ports are not blocked, and try to

lower the ambient temperature. Alternatively, go to Settings >

Hardware > Fan Control to increase fan speed. If issue persists,

please contact the ASUSTOR Support Team.

101

Notification

Connection issue on your ASUSTOR NAS and hard drive

interface has been detected. Please ensure the hard drive is

properly installed in the chassis or drive tray, and that the tray

is properly installed in your ASUSTOR NAS. If issue persists,

please contact the ASUSTOR Support Team.

102

Notification

Excessive physical shock to the hard drive has been detected.

Please ensure your hard drive and ASUSTOR NAS are placed on