Quick Start Guide

10
4. Connect the power cable to the device.
5. Connect the other end of the USB 3.0 cable to a USB 3.0 port on the rear panel of your NAS, which should
not be powered on yet. When the NAS is powered on, the AS6004U will also be powered on. When the NAS
is powered off or in sleep mode, the AS6004U will also enter into sleep mode. When the USB 3.0 cable is not
connected to a NAS, pressing the power button on the AS6004U will cause it to enter into sleep mode.
Note:
1. The AS6004U can only be connected to your NAS via the NAS’s rear USB 3.0 port. It will be unable to
operate properly if you connect it to your NAS via either the front USB 3.0 port or rear USB 2.0 ports.
2. If your NAS is already powered on, connecting the AS6004U to it using the USB 3.0 cable will cause
the AS6004U to power on.