Quick Start Guide

9
5. Once the latch is secure, you can lock it in place using the disk tray lock. Using a flathead screwdriver, turn
the lock counterclockwise to lock the latch mechanism. Turning the lock clockwise will unlock it.
Connecting Your Device
Note: You can use the provided accessory to secure the USB 3.0 cord in place, if you are concerned
about it becoming detached when the NAS is moved.
1. Take the cable bracket accessory and insert it into its corresponding port on the rear panel of the device.
2. Connect the USB 3.0 cable to the device.
3. Take the USB 3.0 cable and push it into the bracket accessory as shown in the graphic below. Ensure that it
is secure.