User guide

Setup and Configuration 6-17
29. Click on Next.
30. Select a dot style in the box below the video display.
> Consult the on-line help for assistance, if necessary.
31. Click on Next.
32. Answer “Yes” if you are asked if you want to re-teach the reference dots.
33. Use the Position Controls to center the needle tip over the first simulation dot as
shown in the on-screen prompt.
34. Click on Teach.
35. Repeat the previous 2 steps for the other three dots.
> Once you have taught the location of all four dots, FMW automatically
dispenses the four dots, then asks for camera alignment for each dot.
36. Realign the crosshairs to the dot, if necessary, or click on click on Teach.
37. Repeat for the other three dots.
38. Click on Done to accept the results.
This concludes the tutorial on Calculate Master Offsets.