Specifications

Safety 2-1
2 Safety
Overview
Operation of the TC V3 Conformal Curing Oven involves heat, electrical power, mechanical devices, and
the use of hazardous materials. It is essential that every person servicing or operating the Cure Module
fully understands all hazards, risks, and safety precautions described in this section. When properly
operated and maintained, the Cure Module will be safe and reliable.
This section is intended to provide basic safety information necessary for operating, maintaining, and
servicing your TC V3 Cure Module. This section covers the following topics:
•
Facility Requirements
•
Safety Warning Labels
•
Basic Safety Precautions and Practices
•
Emergency Shutdown
•
Earthquake Precautions
•
Lockout of Electrical Energy
Use of this equipment in ways other than those described in the documentation supplied with the
equipment may result in injury to persons or damage to property.
To further optimize safe operation, maintenance, and servicing of the TC V3, precautions and
recommended practices are included with the procedures throughout this manual.
WARNING! Safety is considered a joint responsibility between the original equipment
manufacturer and the end-user (owner). Safety precautions and practices should
be in accordance with governing laws and regulations, and facility requirements
in addition to those recommended in this manual.
WARNING! CAUTION!
Facility Requirements
Unsafe equipment conditions can result in personal injury or property damage.
Failure to properly operate and maintain the Cure module in accordance with this
manual may jeopardize the built-in safety features.
To ensure optimal performance and safety, it is necessary to install the Cure Module in a facility that
meets the necessary requirements. Refer to the Operations Manual for more information.