User Manual

Specifications:
Dimensions:
5.0” x 3.5” x 0.8” (127mm x 89mm x 20mm) (LWD)
Weight:
0.72 pounds (270 grams)
Electrical:
Input Voltage: 10 to 24V DC
Input Current: 340mA at 12V DC
Voltage Spikes: Up to 30V DC for 0.1 second
Current Consumption:
Standby: <1mA at 12V DC
Operating: 310mA
Memory:
4MB Flash (System firmware and user programming), upgrade to 8MB
128KB RAM (System and user data), upgrade to 4MB
Environmental:
Operating Temperature: -4° to 140° F (-20° to 60° C)
Storage Temperature: -40° to 221° F (-40° to 105° C)
Humidity: 0 to 95% RH, non-condensing
Shock/Vibration/Mechanical: Tested per SAE J1455 Aug 94, ASTM D-3580,
ASTM D-4728-95, ASTM D-5176
ESD: 4kv contact, 8kv air
Connectors and I/O:
Data Port 1, utilized by i DT only
Data Port 2, serial data port for external devices such as temperature sensor
PTO I/O, two ground sense and two +12V sense, interface for up to 4 contact-based switch
events
External Modem, interface to iDEN700, Nextel phone
RF Connectors
SMA jack, GPS antenna
LED Indicators
GPS – Solid when operating normally, blinking when initializing
COMM – Solid when operating normally, blinking indicates antenna, coverage or connection
issue
DATA – Solid when data is waiting to be transmitted, off when no data is in the buffer
ACTIVE – Blinking when operating normally, solid when insufficient power to i LM
FCC Information
FCC ID: PDCILM-2500
This device complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
RF Exposure Information
The following Cautionary statement will be visible to all persons exposed to transmitter:
“ CAUTION: All Persons must be at least 20 cm from modem antenna when transmitter
operating to meet FCC RF exposure requirements.”