User's Guide

DRAFT 11/10/04
Confidential Information 7 PN: 900-003x-000 DRAFT
© 2002 At Road, Inc.
All Rights Reserved
(2) WAN LED: Steady GREEN.
(3) WLAN LED:
- OFF: No WiFi 802.11b device is connected to it.
- ON Steady: Some WiFi 802.11b device is connected to it.
(4) GPS LED: Steady GREEN
Information on the installer screen
The installer screen is designed to present the most important information in a clear, easy to
follow format. If you have feedback on the presentation of the screen then please pass this
back to @Road so that the screen information can be improved in future firmware releases.
The information presented covers :
• Firmware version of the iWM
• IWM serial number
• Ignition sense state (ON/OFF)
• GSM signal and registration status
• GPS status (whether making position fixes, and whether tracking satellites)
• StatWhere switch status (ON/OFF)
• Configuration of the Data2 accessory port.
Screen Layout
The screen shows information in the format shown below. If the screen appears grossly
different then you have an iWM with an earlier version of firmware, in which case you should
press the VIEW key to return to normal operation since none of the information on earlier
iWMs is useful to customer satisfaction group or for general installation purposes.
Most of this screen is quite intuitive. However, below is a complete description or the fields
and how they can help in troubleshooting an installed unit :
IMPORTANT
Please allow 15 minutes for complete initialization.
DO NOT MOVE the vehicle during this process
3.00 FD000123 IGN:OFF M:
GPS:in-fix(8B) SW:0000 D2:temp(24)
FW vers
Serial number
Ignition sensor
Modem status
GPS status
# of satellites
tracking
StatWhere
switch status
Data2 configuration