User Manual

10
Telephone operation
Basic phone operation
Continued from previous page
Handset
To make a call:
Lift the handset.
Dial a number.
To override automatic line selection, press the
LINE button for the line you wish to select, then
lift the handset.
To answer a call, lift the handset.
To hang up, place the handset on the telephone
base.
Speakerphone
To make a call:
Press and release the desired LINE button or
[ SPEAKER]. The SPEAKER light goes on.
Wait for a dial tone, then dial the number.
To answer a call, press [ SPEAKER] or press
the LINE button of the incoming call.
To end the call, press [ SPEAKER].
NOTES:
If SPEAKERPHONE is selected in the
AUTOMATIC MODE menu (page 39 of the
installation guide), pressing any line key selects
the line and turns on the speakerphone. If
HEADSET is selected in the AUTOMATIC MODE
menu and a headset is connected, pressing
any LINE key selects the line and turns on the
headset.
If headset is programmed as the default mode,
you must press [ SPEAKER] to turn on the
speakerphone.
Continued on next page
•
1.
2.
•
•
•
•
1.
2.
•
•
•
•