User Manual
Table Of Contents
- Getting started
- Telephone operation
- Intercom operation
- One-touch setup and operation
- Using a 1080 mailbox
- Glossary
- Time/date
- Centrex operation
- General product care
- Important product information
- For C-UL compliance
- FCC and ACTA information
- Part 15 of FCC rules
- Limited warranty
- Technical specification
- Index
- Troubleshooting
20
Telephone operation
Basic phone operation
HOLD
Use this feature to hold one line while accessing
another, or as part of the conference and call
transfer features.
While on a call, press and release [HOLD]. The LINE
light for the line on hold ashes slowly in green,
and a double-beep sounds every 30 seconds to
remind you that the call is on hold. (To turn o the
reminder beep, see HOLD REMINDER on page 36
of the installation guide.)
If you are using the handset, you can place
the handset in the telephone base without
disconnecting the call. If you are using the
speakerphone, the speakerphone turns o
automatically when you press [HOLD].
To release the hold, press and release the [LINE]
button of the call on hold.
NOTES:
• The phone automatically disconnects a call on
hold after 20 minutes. To keep a call on hold for
longer than 20 minutes, release for hold within
20 minutes and then place the call on hold again.
• You cannot put an intercom call on hold.
• If a line is in use, pressing [INTERCOM] places
the line on hold and activates the intercom
(page 24).