User Manual
Table Of Contents
- Getting started
- Telephone operation
- Intercom operation
- One-touch setup and operation
- Using a 1080 mailbox
- Glossary
- Time/date
- Centrex operation
- General product care
- Important product information
- For C-UL compliance
- FCC and ACTA information
- Part 15 of FCC rules
- Limited warranty
- Technical specification
- Index
- Troubleshooting

23
Telephone operation
Call transfer
Transfer a call
Use this feature to transfer a call to any other
system phone. Once you transfer a call, it can be
picked up at any other system phone, not just at
the extension you called.
NOTE:: If a transferred call is not picked up
within 20 minutes, the phone automatically
disconnects the call.
Blind transfer
Use this feature to make a blind transfer. While on
a call:
Press [TRANSFER]. The outside call is
automatically put on hold. TRANSFER LINE#Y
TO (with Y being the line in use) appears on the
third line of the display.
Press the one-touch button for the destination
extension.
-OR-
Dial the destination extension number to which
you are transferring the call. The extension
number appears on the fourth line of the
display.
Hang up.
Your phone reminds you with a double-beep every
30 seconds when a transferred call has not been
answered. (To turn off the reminder beep, see
HOLD REMINDER on page 36 of the installation
guide.)
NOTE:: If you do not dial an extension within 10
seconds, the transfer automatically cancels. The
call is still on hold. Press the corresponding LINE
key to resume the call.
1.
2.
3.
10:01AM 11/23
00:30
10:01AM 11/23
00:30
TRANSFER LINE#1
TO
10:01AM 11/23
EXT 11
TRANSFER LINE #1
TO 12










