User Manual
Table Of Contents
- Getting started
- Telephone operation
- Intercom operation
- One-touch setup and operation
- Using a 1080 mailbox
- Glossary
- Time/date
- Centrex operation
- General product care
- Important product information
- For C-UL compliance
- FCC and ACTA information
- Part 15 of FCC rules
- Limited warranty
- Technical specification
- Index
- Troubleshooting
33
Intercom operation
Voice page
Room monitor
Use this feature to monitor a room. Make a
single-page call to a system phone to monitor the
sounds from that room. To use this feature, the
auto-mute feature on the called telephone must
be turned off (page 35 of the installation guide).
Press [INTERCOM].
Press [ENTER] to select PAGE.
Enter the called extension number (20).
After your telephone displays PAGE and the
destination extension number, press [MUTE].
The called telephone beeps, then turns on its
speakerphone automatically. Now, you can
monitor the room of the called telephone
without being heard.
To end room monitoring, press [INTERCOM] on
your telephone.
Make an intercom conference call
Use this feature to invite someone to join an
existing conversation. Someone at a system
phone having a two-way conversation on an
outside line can invite someone at an extension to
join the conversation. Follow the directions under
Conference calls on page 22, making sure to
establish the non-intercom call first.
NOTE: You cannot put an intercom conference
call on hold.
1.
2.
3.
4.
10:01AM 11/23
EXT 11
PAGING
INTERCOM
10:01AM 11/23
EXT 11
PAGE 12