User Manual
Table Of Contents
- Getting started
- Telephone operation
- Intercom operation
- One-touch setup and operation
- Using a 1080 mailbox
- Glossary
- Time/date
- Centrex operation
- General product care
- Important product information
- For C-UL compliance
- FCC and ACTA information
- Part 15 of FCC rules
- Limited warranty
- Technical specification
- Index
- Troubleshooting
37
One-touch setup and operation
One-touch storage
Continued from previous page
6. Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
NOTES:
If the desired one-touch key location is empty,
the screen displays SAVED!. If there is a already
telephone number in it, the screen displays
REPLACE SPD#XX? (XX is the desired
one-touch location number). You can replace
the current entry by pressing [ENTER] or keep
the current entry by pressing [ ] or [ ] until
you see NO REPLACE?. Press [ENTER]. Choose
another one-touch key location.
Only the last number dialed from this extension
can be copied to a one-touch location. The
other numbers in the redial stack cannot be
copied.
Press and hold [ENTER] to exit one-touch
setup.
•
•
•