User Manual
Table Of Contents
- Getting started
- Telephone operation
- Intercom operation
- One-touch setup and operation
- Using a 1080 mailbox
- Glossary
- Time/date
- Centrex operation
- General product care
- Important product information
- For C-UL compliance
- FCC and ACTA information
- Part 15 of FCC rules
- Limited warranty
- Technical specification
- Index
- Troubleshooting
41
One-touch setup and operation
To modify a one-touch number
Continued from previous page
4. Press the desired one-touch key to store the
telephone number in a location.
-OR-
Press [LOWER], then press the desired
one-touch key to store the telephone number
in the lower location.
5. Press [ ] or [ ] to select CANCEL. Press
[ENTER] to exit the VIEW feature. To move to
the next feature, press [ ].
-OR-
Press and hold [ENTER] to exit.
NOTE: If the desired one-touch key location
is empty, the screen displays SAVED!. If there If there
is a telephone number in it, the screen displays
REPLACE SPD#XX? (XX is the desired one-touch
location number). You can replace the current
entry by pressing [ENTER], or keep the current
entry by pressing [ ] or [ ] until you see NO
REPLACE?. Press Press [ENTER], then choose another
one-touch key location.