User Manual

65
Cannot join a
conversation in progress.
Display screen is blank.
Make sure the power cord is connected to
both the phone and an electrical outlet not
controlled by a wall switch.
•
The call privacy feature
does not work.
In some installations that have fiber optic service
(digital service to the building, analog service
within the building), the signals to the extensions
might not support the call privacy feature.
•
The call privacy feature prevents another set on
the system from interrupting a conversation.
Make sure you press the LINE button to release
privacy. (See Call privacy on page 21.)
•
•
Appendix K
Troubleshooting
Operation during a power
failure.
This phone operates during a power failure if
a working battery is installed. You are able to
answer calls with the handset and dial calls using
the dial pad keys and the one-touch or redial
features. No other features will work until power
is restored. All programming is retained during a
power failure.
•
Error tone (fast busy
signal) when making a
page call.
The Do Not Disturb feature is activated at the
extension you are calling.
•
A double beep sounds
every 30 seconds.
There is a call on hold at this extension. Press
and release the LINE button of the call on hold to
return to the call and turn off the reminder beep.
•
The telephone line cord might be
malfunctioning. Try installing a new telephone
line cord.
Make sure the Do Not Disturb feature is not
activated (page 15).
If you are on a call, a beep alerts you of
incoming calls on the other lines.
•
•
•