Installation Manual

36
Phone settings
TONE/PULSE
Use this feature to choose tone (Touch-Tone) or
pulse (Dial-Pulse) dialing. The factory setting is TONE.
Change this to PULSE (rotary) only if you do not have
touch-tone dialing service.
1. Press [ENTER].
2. Press [ ] or [ ] until you see PHONE SETTINGS.
Press [ENTER].
3. Press [ ] or [ ] until you see TONE/PULSE.
4. Press [ ] or [ ] to choose TONE or PULSE.
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
HOLD REMINDER
Use this feature to turn the hold reminder tone on
or o. If you selected ON, when an outside call is on
hold (see the HOLD section on the user’s manual), a
double beep sounds every 30 seconds to remind you.
1. Press [ENTER].
2. Press [ ] or [ ] until you see PHONE SETTINGS.
Press [ENTER].
3. Press [ ] or [ ] until you see HOLD REMINDER.
4. Press [ ] or [ ] to choose ON or OFF.
5. To move to MAIN MENU, press [ ].
-OR-
To exit setup, press and hold [ENTER].
PHONE SETTINGS
TONE
TONE/PULSE
PHONE SETTINGS
ON
HOLD REMINDER