Installation Manual

39
Special options
Use the following features to customize some
multi-line functions, display settings, Central
Oce Voice Mail (COVM) setup, and, for 1070 &
1080 users, caller ID/area code setup.
PRIME LINE
Use this feature, also known as automatic line
selection, to choose which line is automatically
selected each time you li the handset, press
[ SPEAKER] or [HEADSET] (if a headset is
connected) to make or answer an outside call.
1. Press [ENTER].
2. Press [ ] or [ ] until you see SPECIAL OPTIONS.
Press [ENTER].
3. Press [ ] or [ ] until you see PRIME LINE.
4. Press [ ] or [ ] to choose the desired line
(LINE 1, LINE 2, LINE 3 or LINE 4).
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
AUTOMATIC MODE
Use this feature to choose the mode
(speakerphone or headset) to be used aer you
select a line key to make or answer an outside
call, or when you press [INTERCOM] to make or
answer an intercom or voice page call. (See the
Intercom operation section in the user’s manual
for information on the intercom.)
If you li the handset, the handset mode is used.
1. Press [ENTER].
2. Press [ ] or [ ] until you see SPECIAL OPTIONS.
Press [ENTER].
3. Press [ ] or [ ] until you see AUTOMATIC MODE.
4. Press [ ] or [ ] to choose SPEAKERPHONE or
HEADSET.
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
SPECIAL OPTIONS
LINE 1
PRIME LINE
SPECIAL OPTIONS
SPEAKERPHONE
AUTOMATIC MODE
NOTE: If you select
HEADSET when you
have no headset
connected, and you
press a line key, the
speakerphone is used.