User Manual

37
One-touch setup and operation
One-touch storage
Continued from previous page
Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
NOTES:
If the desired one-touch key location is empty,
the screen displays SAVED!. If there is already
telephone number in it, the screen displays
REPLACE SPD#XX? (XX is the desired
one-touch location number). You can replace
the current entry by pressing [ENTER], or keep
the current entry by pressing [ ] or [ ] until
you see NO REPLACE?. Press [ENTER]. Choose
another one-touch key location.
Only the last number dialed from this extension
can be copied to a one-touch location. The
other numbers in the redial stack cannot be
copied.
Press and hold [ENTER] to exit one-touch
setup.
6.
•
•
•