User Manual (Part 2) 2.
You must install and charge batteries before using the telephone STOP! See page 7 for easy instructions For customer service or product information, visit our web site at Please also read www.telephones.att.com Enclosed in product package User Manual (Part 2) 2.4 GHz Cordless Telephone 2231/1231 with Caller ID & Call Waiting Important Product Information or call 1-800-222-3111 Table of contents Getting Started Caller ID Logs Quick reference guide ........................2 How Caller ID works .
Getting Started Getting Started Quick reference guide Quick reference guide Handset Telephone Base Select/Menu V CID Press to display menu, or to select highlighted item from menu. Press to scroll down in menus. Press when phone is not in use to display Caller ID information (see page 20). While entering names, press to move the cursor to the left. PAGE/HANDSET LOCATOR ^ DIR Press to locate handset if lost (see page 12). Press to scroll up in menus.
Getting Started Getting Started Parts checklist Before you begin Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: About Caller Identification Telephone operating range Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call.
Getting Started Getting Started Telephone base & charger installation Battery installation & charging Install the base and charger as shown below. Choose a base location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. After installation, place the handset in the base or charger and allow to charge for 12 hours before use.
Getting Started Getting Started Wall mounting Belt clip & optional headset The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Install belt clip as shown below if desired. Connect telephone line cord and AC adapter as shown on page 6. Press plastic tabs inside notches to release and open hinged wall mount.
Telephone Operation Elapsed time PHONE 00:00:02 Basic operation Options while on calls Making and answering calls Volume control To answer an incoming call, press PHONE (or SPK, or any dial pad key). To make a call, press PHONE or SPK, then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPK to dial. Press DELETE or CLEAR at any time to make corrections as you are entering numbers.
Telephone Operation Telephone Operation Highlighted menu item Intercom and call transfers Intercom calls The intercom allows conversation between handsets without using an outside line. > PHONE BOOK CALL LOG Press OFF at any time to cancel an operation, back up to the previous menu, or exit the menu display. When your intercom call is finished, press OFF to end the call.
Telephone Operation Handset settings HANDSET NAME AT&T_ LANGUAGE ENGLISH TURN INDICATOR OFF? PAT WILLIAMS 555-1234 Phonebook Handset name Shared phonebook directory At this menu you can customize the name that appears on each handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 16 to enter letters). Press SEL to confirm. The phonebook directory is stored in the base, and is shared by both handsets.
Phonebook Phonebook AT&T AT&T New phonebook entries Phonebook search Press DIR to display the first listing in the phonebook. You can then use the up/down arrows to browse through the phonebook, or search to find a specific entry. Press OFF at any time to exit the directory. To create a new phonebook entry > PHONE BOOK CALL LOG Press MENU twice to select PHONE BOOK. Press V to highlight STORE. Press SEL, then enter the telephone number when prompted.
Phonebook Caller ID Logs AT&T To dial, change or delete entries To dial a number When any phonebook entry is displayed, press PHONE (or SPK) to dial the displayed number. Andrew 555-6789 How Caller ID works Pat Williams 555-1234 11/23 12:34 PM If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring.
Caller ID Logs AT&T 6 NEW CALLS Appendix To review your call log Screen icons, indicator lights & tones NEW To review your call log Pat Williams 555-1234 NEW 11/23 12:34 PM Chris Thompson 908-555-0100 NEW 11/22 10:12 PM Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left.
Appendix Appendix In case of difficulty Technical specifications If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call 1-800-222–3111. Telephone does not work at all Make sure batteries are installed and charged correctly (see page 7). RF Frequency Band (Handset to Base) 2400 MHz — 2483 MHz • • Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.
Appendix Index A AC adapter, 6, 8 Alert tones, 21 Answering calls, 10 M Making calls, 10 Menus, 2, 13-14 Mute, 10 B Battery charging, 7 Battery installation, 7 Belt clip, 9 N Names, enter into phonebook, 16 search for, 17 C Call logs, 19 Caller ID, 19 add entries to phone directory, 20 delete entries, 20 dial entries, 20 CID, 21 Conference calls, 11 O Operating range, 5 P Paging, 12 Phonebook, dial number, 18 edit entries, 18 name search, 17 new entries, 16 Problems, 22 D Delete Call Log entries, 20
www.telephones.att.com Copyright 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 04/04.