Answering Machine User Manual

8
USING THE SET UP KEYS
The Set Up keys are used to enter data and answer questions during the
configuration of your AT&T VoiceMail Manager 200 (Refer figure 4 on page 7).
☎ YES (1) - Answers YES to a question.
☎ NO (2) - Answers NO to a question.
☎ REVIEW ▲
▲▲
▲ (3) – Used to enter data. Also, scrolls through the Call Log starting
with the oldest received call, and moving towards the most recent call. Used to
increase display contrast.
☎ REVIEW ▼
▼▼
▼ (4) – Used to enter data. Also, scrolls through the Call Log starting
with the newest received call, and moving towards the oldest call. Used to
decrease display contrast.
Using the Review Keys to Enter Data
During Set Up, the REVIEW Keys are used to enter numbers for area codes and
password. Press the ▲
▲▲
▲ key to increase numbers and the ▼
▼▼
▼ key to decrease
numbers. When the desired number is reached, press YES to set, and then enter the
next number. After the last number has been set, the AT&T VoiceMail Manager 200
will ask IS THIS CORRECT? YES/NO. Press NO if you made a mistake, press YES
if the number is correct.
☎ DIAL PHONE/HANG UP (5) – (far right: inactive during initialization) Press this
key to speed dial a number from the Call Log (This key is also used to hang
up).
☎ SETUP (6) – Use this key to enter the Set-Up mode of your AT&T VoiceMail
200.