Switch User's Manual

Issue 2 December 1995 5-7

Load the SID Software

12. Press (F3).

After you press the key, you receive a confirmation message as shown in

Figure 5-3. The message tells you that the serial port was registered

successfully and that you need to start the voice system

Figure 5-3 Switch Link Administration Confirmation Message

13. Press (F6).

You see the Switch Link Administration screen.

14. Press (F6) again.

You see several messages indicating that the installation is still running.

When the installation process finishes, you see the following messages:

Installation of INTUITY SID Integration Package (sid)

was successful.

Insert a diskette into Floppy Drive 1.

Type [go] when ready

or [q] to quit: (default: go)

15. Remove Disk 2 of 2 from the floppy drive.

16. Enter q to quit.

The Software Install screen is redisplayed.

17. Press until you see the INTUITY Administration menu.

Restart the voice system as described in the next section.

SAVE

CANCEL