Specifications

ManualsBrandsAT&T ManualsMedia Converter3G MicroCell

If anything is missing or appears to be damaged,

contact AT&T Customer Support at 1.800.768.1212

for assistance.

Let’s get started.

Start Here!

AT&T 3G MicroCell

Getting Started Guide

Congratulations on the purchase of your new AT&T 3G MicroCell

. The 3G MicroCell provides voice and data service to AT&T 3G

wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum

cellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or oce.

• Allow up to 2 hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup)

takes 10-15 minutes. The additional time is for system conguration and 3G service activation. These tasks are

handled by the 3G MicroCell and require no eort on your part.

System Administrators (business customers) see Firewall Specications on page 5 of the AT&T 3G MicroCell

User Manual.

What’s in the Box?

• Remove the contents of the AT&T 3G MicroCell

package.

• Verify that you received the following:

AT&T 3G MicroCell™

AC Power

Adapter

Yellow

Ethernet Cable

Getting Started Guide

and User Manual

If anything is missing or appears to be damaged,

contact AT&T Customer Support at

1.888.334.3787

and

enter PIN 88346

for assistance.

Let’s get started.

Start Here!

AT&T 3G MicroCell

Getting Started Guide

ongratulations on the purchase of your new AT&T 3G MicroCell

. The 3G MicroCell provides voice and data service to AT&T 3G

wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cel-

lular signal strength within its coverage area – it’s like having your own mini cell tower in your home or oce.

• Allow

up to two hours

to have your 3G MicroCell up and running. Your part (online activation and equipment setup)

takes 10-15 minutes. The additional time is required for system synchronization between the 3G MicroCell and the

AT&T network.

• In order to activate your 3G MicroCell you will be required to enter your

AT&T myWireless Account user name

and password

(the same account you use to pay your wireless bill online). If you have not previously registered

for a user name and password, you will be required to do so during the 3G MicroCell setup.

What’s in the Box?

•

Remove the contents

of the AT&T 3G MicroCell

package.

• V

erify

that you received the following:

AT&T 3G MicroCell™

AC Power

Adapter

Yellow

Ethernet Cable

Getting Started Guide

and User Manual

User

Manual

AT&T

3G MicroCell™

User

Manual

AT&T

3G MicroCell™

Summary of content (11 pages)

PAGE 1
Start Here! AT&T 3G MicroCell TM Getting Started Guide C ongratulations on the purchase of your new AT&T 3G MicroCell TM . The 3G MicroCell provides voice and data service to AT&T 3G wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office. • Allow up to 2 hours to have your 3G MicroCell up and running.
PAGE 2
Getting to Know Your 3G MicroCell Power Ethernet (High Speed Internet Connection) GPS Computer 3G External GPS Antenna Computer Ethernet Reset Power Visit att.com/3GMicroCell on the web to learn how you and others can use your new 3G MicroCell. The site also contains up-to-date troubleshooting solutions and demos.
PAGE 3
Step 1: Activation Note: As an added benefit, when placing a 911 call while connected to your 3G MicroCell, the full location address you provide at activation will be sent to local emergency responders. A built-in Global Positioning System (GPS) feature helps deliver this functionality. Work with your TruVista representative to activate your MicroCell. During this time you will be required to provide the address where the MicroCell will be located.
PAGE 4
Option A High Speed Internet with Gateway or Modem and Wi-Fi Router AT&T 3G MicroCell™ Gateway or Wi-Fi Router Ethernet Cable (Included) 1 2 Open Ports 3 Power Connect AC power adapter last . Note: Since you have a gateway or Wi-Fi router, you will NOT need to plug anything into the black port labeled ‘Computer’ on the 3G MicroCell. Remove the sticker that covers the rear panel of your 3G MicroCell. To ensure success, it is important to complete the steps below in order. 1.
PAGE 5
Option B High Speed Internet with Modem Attached to Computer AT&T 3G MicroCell™ This end is attached to your computer. Do NOT unplug. 1 2 Open Port 2 Ethernet Cable (Included) 3 Power Connect AC power adapter last . Modem Note: If you normally use a USB cable to connect to your modem and computer, refer to ‘Connect Your Devices with USB Cables?’ on page 8 of the AT&T 3G MicroCell™ User Manual for cabling alternatives. Remove the sticker that covers the rear panel of your 3G MicroCell.
PAGE 6
Step 3: 3G Status Confirmation 1. Make sure the Power and Ethernet status indicators are solid green *. If you chose Option B, the indicator will be solid green or flashing green during data transfer. Computer status Wait 90 minutes. You have completed your part. Relax and give your 3G MicroCell time to complete system configuration and 3G service activation. Do not turn off power or disconnect. Note: The GPS and 3G status indicators will start flashing green within 10 minutes .
PAGE 7
Step 4: Final Confirmation You will know that your 3G MicroCell service is up and running when the following occur: • The 3G MicroCell unit displays a solid green 3G status . • All AT&T 3G devices on your Approved User List within range of the 3G MicroCell display ‘AT&T MicroCell’ . You will also be receiving an email and/or text message confirming your activation at the email address and/or primary cell phone number that you entered during online activation.
PAGE 8
Things to Know Power cycling the 3G MicroCell and/or your 3G mobile handset can usually resolve minor connectivity issues. Like many electronic devices, your 3G MicroCell and your 3G phone handset may occasionally need to be “rebooted” to reestablish their connection to each other. • Unplug the 3G MicroCell’s power adapter from the wall outlet, wait 10 seconds, and plug it back into the wall outlet. • Turn your 3G handset fully off and then turn it back on.
PAGE 9
Frequently Asked Questions (FAQs), 1.4 continued Where is the best place to setup my 3G MicroCell to get a GPS signal? Ideally your 3G MicroCell should be installed in a room within 3 feet of a window and not in a basement or closet.
PAGE 10
Frequently Asked Questions (FAQs), continued 1.12 What kind of Internet service do I need? You need high speed Internet service over DSL or Cable (satellite Internet service will not work). Downstream speeds of at least 1.5 Mbps and upstream speeds of at least 256 Kbps are recommended for best performance. There are no restrictions on broadband service providers. 2. 3G MicroCell Usage and Productivity 2.
PAGE 11
C is c o S y s t e ms , I nc . 5 0 3 0 S uga r loa f P a r k wa y, B ox 4 6 5 4 4 7 L a w re n c e v i l l e , G A 3 0 0 4 2 678.277.1000 www.cisco.com Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. AT&T, the AT&T logo, and AT&T 3G MicroCell are trademarks of AT&T Knowledge Ventures.