User Guide

To continue your conversation:
•
Press MUTE again and the phone light will be steady.
Special Telephone Services
If you subscribe to special local telephone company services like Call Waiting or Call Forwarding, you can
access them by pressing PHONE whenever you would press the switchhook on a regular phone. This is like
the Flash feature on some other phones.
Memory
This cordless phone can store nine telephone numbers that you can dial just by pressing MEMORY and one
of the number buttons.
Storing a Number in Memory
1. Make sure the handset is OFF.
2. Press MEMORY. The phone light will flash.
3. Enter the phone number (up to 16 digits).
4. Press Memory
5. Press any number button from 1 – 9 for the memory location where the number is to be stored.
6. A three – part tone confirms that the number was stored properly. If you hear a long buzzing tone, or
nothing at all, press OFF, then follow the steps above to store the number again.
Note
: You may choose to store emergency numbers in memory locations. The manufacturer assumes no
responsibility for customer reliance upon this memory feature.
Dialing a Number in Memory
1. Press PHONE.
2. Press MEMORY.
3. Press the number button (1 – 9) you assigned to the number you’re calling.
Memory Card
There is a memory card with an erasable surface located on the base to record names or telephone numbers
of the numbers stored in memory locations.
To write on the memory card, remove the plastic cover by inserting a pointed object in the hole and gently
prying the cover up until it pops out.
Note
: The numbers stored in memory might be lost when you change the handset batteries or if the
batteries run down completely: if this happens, you’ll need to store the numbers again.
Replacing a Stored Number
You can replace a stored number by storing a new number in its place.