User Guide

Storing a Pause In a Memory Dial Number
If this phone is connected to a switchboard you might have to dial an access number (usually 9) to get
outside line. You can store the access number and a pause in the dialing sequence: the pause allows the
switchboard enough time to get an outside line dial tone.
1. When storing a memory number (see above), press and hold the number button of the digit that comes
just before the pause, until a second beep is heard. This inserts a 2 – second pause.
2. You can insert a long pause by continuing to press and hold the number button of the digit that comes
before the pause. A beep is heard for each 2 – second pause inserted.
Note
: Each pause you store is counted as a digit. You can store up to 16 digits in each memory location.
For Example, to store 9, PAUSE, 555-1234 in memory location 3: Press MEMORY, 9, hold until the beep.
Then press 5551234 MEMORY 3.