User`s guide

To turn off the speaker
and return to handset
1
Pick up handset
Green light next to [
Speaker Reset Spkr
] and red light
next to [ Mute ] go off
Speaker goes off
To end a call
1
Press [
Speaker Reset Spkr
]
(while handset is on-hook
Green light next to [
Speaker Reset Spkr
] and red light
and only speaker is active)
next to [
Mute ] go off
Speakerphone
Note: If you are uncertain whether your voice terminal is set for the Speaker button
(listen-only) feature or the Speakerphone (listen and talk) feature, check with your
System Manager.
Use the following procedures if your voice terminal is set for the Speakerphone (listen
and talk) feature.
For directions on using the Reset Speakerphone feature, see "Reset Speakerphone" in
this section.
To place/answer a call
1
Press [
Speaker Reset Spkr ]
without lifting the
handset,
Green light goes on steadily
or to use speakerphone
2
Place or answer call, or access selected feature
with any feature
3
Adjust speakerphone volume if necessary
To raise the volume, press the right half of the
Volume control button labeled [
];
to lower the volume, press the left half of the
Volume control button labeled [
]
If you have a display, it shows
[ Speaker L > > > > H
]
(There are 8 possible volume settings. On the
display, 1 arrow is the lowest setting, and 8 arrows
is the highest setting)
Note: The Volume control does not affect an external
speakerphone attached to your voice terminal.
To prevent other party
1
Press [
Mute ]
from hearing you
Red light goes on and other party cannot hear you
2
Press [
Mute ] again to resume talking to party
25