Quick Start Guide

23
Turn answering system on or o
The answering system must be turned on to answer and record messages.
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Answer on/o -> SELECT.
3. / to choose On or O-> SELECT.
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
f Press to turn the answering system on or o. If the answering system
is turned on, it announces, “Calls will be answered.” If the answering system is
turned o, it announces, “Calls will not be answered.”
Message alert tone
When this feature is on, and there is at least one new message, the telephone base
beeps every 10 seconds.
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Ans sys setup -> SELECT.
3. / -> Msg alert tone -> SELECT.
4. / to choose On or O -> SELECT.
Call screening
Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. If you turn call screening on, you hear the
incoming message. While monitoring an incoming message, you can answer the call
by pressing HOME/FLASH on the handset.
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Ans sys setup -> SELECT.
3. SELECT to select Call screening.
4. / to choose On or O -> SELECT.
Answering system