Owner`s manual

Testing and Maintenance

(Continued)

After a fire, environmental, or auxiliary alarm, the system will normally

not respond to the same type of alarm again for about 5 minutes. (See

“Automatic Disarm Period,” page 12.) But in the DEMONSTRATION

mode, this disarm period is only 2 minutes.

After you hear the alarm sound, cancel the alarm by entering your

security code on the keypad of any transmitter.

Repeat for each transmitter in your system.

NOTE:

The Passive Infrared Transmitter (PIRT) sends an alarm signal

when it first detects motion and will not send another until it resets itself.

The

PIRT

will reset itself only after it does not detect any motion for

2-1/2

minutes.

Enter your security code on your keypad and set your system to the

mode you want. (It is currently set to the AWAY mode.)

Press Test/Demo on your Central Controller once to take the system out

of the DEMONSTRATION mode. Your system is now in the mode you

selected in step

(Continued)