Owner`s manual

FCC Information
Interference Information: Part 15 of FCC Rules
Some telephone equipment generates and uses radio-frequency energy and,
if not installed and used properly, may cause interference to radio and
television reception.
Your AT&T product has been tested and found to meet the standards for a
Class B computing device, as specified in Subpart B of Part 15 of the FCC
Rules. These specifications are designed to provide against such interference
in a residential installation. However, there is no guarantee that interference
will not occur in a particular installation.
If your AT&T product causes interference to radio or television reception
when it’s in use, you might correct the interference with any one or all of
these measures:
Where it can be done safely, re-orient the receiving television or radio
antenna.
To the extent possible, relocate the television, radio, or other receiver with
respect to the telephone equipment.
Plug your radio or television into an AC outlet that is not on the same
circuitas your security system.
If you need assistance, call your AT&T authorized security dealer.
38