User manual

FEATURE SETUP
9
Telephone Feature Setup
1 Make sure the handset is off.
2 Press G.
3 Press - until the feature you want to set is flashing on the screen.
(Features are described in the chart below.)
4 Press S.
5 Press - or + until the setting you want flashes.
6 Press S
— OR —
If necessary,use the keypad to enter numbers (for example,when you
program the area code),then press S.
Telephone Features
Feature: Directions:
AREA-HOME
Select HOME. The screen displays ENTER AREA CODE.
If you live in an area where you make calls within your
own area code by dialing seven digits,enter your three-digit
area code,then press S
— OR —
If you live in an area where all local calls require 10 digits
(area code plus phone number,without dialing “1”first),
enter 000 for the area code,then press S.
AREA-LOCAL An area code is local if you do not dial “1”before the area
code. Enter up to five three-digit local area codes. Select
LOCAL,use - or + to move from area code #1 through
area code #5,and enter area codes. Press S to save.
KEY BEEPS If you turn this feature on,the handset sounds a tone
every time you press a button. Select KEYBEEPS,press -
until OFF or ON is flashing,then press S.
RINGER You can choose from four different ringers for each line.
Press - or + until LINE 1 or LINE 2 is flashing,then
press S. Press - to hear the different ringers,then
press S to save the last ringer heard or choose OFF.
Repeat for the other line,then press O.
NOTE: When editing an area code, use + to delete existing digits, then
enter the new area code. Press S to save.