User`s manual

CALLER ID OPERATION
Reviewing Call History
To review earlier calls, press
CALL LIST -.
To advance through call history from
an earlier call, press CALL LIST +.
When you reach the end of call
history, the screen displays
END OF LIST, then begins again.
Display Dial
• Press to call the displayed
number.
• The screen shows the number
being called, the speakerphone
is activated, and the call is
dialed.
• If the screen displays ERROR
PRESENT or NO NUMBER,the
present number cannot be
dialed.
• You cannot use this feature to
dial PRIVATE calls.
17
Display Dial Options
Follow directions for “Reviewing Call History” to
display the desired number.While number is displayed,
press to scroll through choices for dialing (without
area code, with area code, with 1 plus area code).
Clear
Press to exit Caller ID Operation
and return to the idle screen.
Call Display
Between the first and second rings,
the screen displays:
• Your caller’s name (15 letters are
sent by your phone company),
• The caller’s area code and
telephone number (area code is
not displayed if it is programmed
as the Home Area Code),
• The time and date of the call, and
• The call’s position in call history.
Call information is displayed for
about 30 seconds.
958_book_1ATT 6/3 6/3/02 4:27 PM Page 17