Manual

Getting started

Battery installation

Before using the telephone, you should install four AA alkaline batteries

(purchased separately). You can use the telephone without batteries to dial

and receive calls. However, the line lights and the automatic redial feature will

not work, and the speakerphone and optional headset may not work properly

in all conditions. To use the speakerphone without batteries, you must

press and hold SPEAKER for one second.

NOTES:

• If you do not install batteries, you will hear a low battery warning tone every

time you lift the handset or press SPEAKER.

• Use disposable alkaline batteries only. Do not use rechargeable batteries.

CAUTION: Always unplug the line cord, before installing new batteries.

1. Press the tab as shown

and flip into the down-

ward position.

2. Push the tab as shown and

lift to remove the battery

cover. Insert four new AA

alkaline batteries (purchased

separately) following the

polarity markings in the

battery compartment.

3. Replace the

battery cover.

The following symptoms indicate that the batteries in your telephone are low and

need to be replaced, even though there is no low battery warning yet:

• The automatic redial feature does not work or is not working properly, or

• HEADSET cannot be used to make or answer calls.

If you experience either of these symptoms, try replacing the batteries following

the instructions above.

PUSH TAB TO OPEN