User`s manual

Voice Users

1 Way Voice with Voice Alert

Voice Alert: If the wearer of the Device would like to alert the Primary User to listen in, they can

press and hold the green button on the Device for 4 seconds. The Device will place a call to the

number listed as the Current Voice User (pictured below).

To set up the designated telephone number for this feature, click on the User’s tab. On the line that

displays the individual user’s information, you’ll see 3 tabs to the right titled: EDIT, SET VOICE USER,

and DELETE. Click on SET VOICE USER. If set correctly, a pop up will display the words “Update

Successful”.

1 Way Voice: To initiate a monitoring call to the Device, call the Device’s phone number. The Device’s

phone number is listed on the Quick Start Guide that was included in your packaging. By calling the

Device, you will be able to listen in to the surroundings of the Device. The Device will not ring or

vibrate when called, but will automatically pick up after 2 audible rings on the caller’s end. The rings

are only audible to the caller. The caller can mute their phone to shut out any background noise.

Important Note Regarding Voice Monitoring: The legality of listening to conversations in

which you are not a participant is governed by local, state and federal law. Consult all ap-

plicable laws to determine the conditions pursuant to which you are permitted to listen to

conversations without the consent of one or all of the parties to the conversation. You are

responsible for complying with all applicable laws (see page 24).