Other Content

ManualsBrandsAT&T ManualsCorded TelephonesAT&T CL2909 Corded Phone with Speakerphone and Caller ID/Call Waiting, White

1

2

3

4

Product Troubleshooting

Problem:

My speakerphone fades in and out. What can I do to fix this?

Solution:

Excessive background noise will cause a speakerphone to fade in

and out. Try controlling the background noise by turning off any

audio devices near the speakerphone. Also, try to avoid interrupting

the person at the other end of the conversation while they are

speaking. If background noise cannot be controlled, you should

terminate speakerphone operation and return to normal handset

mode.

Excessive background noise will cause a speakerphone to fade in

and out. Try controlling the background noise by turning off any

audio devices near the speakerphone. Also, try to avoid interrupting

the person at the other end of the conversation while they are

speaking. If background noise cannot be controlled, you should

terminate speakerphone operation and return to normal handset

mode.

My battery pack does not last very long between charges. I am

charging the handset more frequently. What should I do?

Summary of content (5 pages)

PAGE 1
Product Troubleshooting Problem: My speakerphone fades in and out. What can I do to fix this? Solution: Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should terminate speakerphone operation and return to normal handset mode.
PAGE 2
Solution(s) Over time, your rechargeable battery may lose some of its ability to hold a charge. This is more likely to occur if it is a Ni-Cd(NickelCadmium) battery. If you are unsure of the composition of your battery, check the specifications printed on the battery pack. To restore your battery's ability to hold a full charge: First, use the cordless handset without recharging it, until the phone alerts you that battery is low.
PAGE 3
you take your present battery along to insure your replacement is the correct size and has the correct plug (where applicable) and specifications. Telephone does not ring. Make sure the RINGER switch is set to LO or HI.If there are several other telephones on the same line, try disconnecting some of the other telephones. Having too many telephones connected can also create problems such as low ringer volume or impaired sound quality during calls. No dial tone Make sure all plugs are connected properly.
PAGE 4
PAGE 5