User`s manual

27
Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller’s phone
number is also private or unknown, no information will be announced. The
default setting is On.
To turn on or off the caller ID announce feature:
Press MENU/SELECT in idle mode to enter the
main menu.
Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
Use qCID or pDIR to scroll to >Caller ID annc, then
press MENU/SELECT.
Use qCID or pDIR to scroll to the desired option, then
press MENU/SELECT.
Set all On/Off - Change the setting for the base and all handsets.
Base - Change the setting for the telephone base only.
5. Use qCID or pDIR to highlight >On or >Off, then press MENU/SELECT.
There is a confirmation tone and the screen returns to the previous menu.
If you change the setting for Set all On/Off, the screen shows CID Annc
ON/OFF on all HS & BS.
NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
This feature does not announce information for call waiting calls.
It takes at least 2 rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won’t have time to announce
the caller’s information.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
Caller ID announce is available in English only.
1.
2.
3.
4.
•
•
5.
•
•
•
•
•
LCD language
>Caller ID annc
p
q
CALLER ID ANNC
>Set all On/Off
p
q