User`s manual

ManualsBrandsAT&T ManualsCordless TelephoneCL80111

Telephone settings

Telephone base settings

Home area code

If you dial 7 digits to make a local call (no area code required), enter your

area code into the telephone as the home area code. When you receive a

call from within your home area code, the caller ID history only displays the

7 digits of the telephone number.

This feature makes it easy for you to place a call from the caller ID log. If you

dial 10 digits to make a local phone call, do not use this home area code

feature. If you do, you cannot place local calls from your caller ID log, as they

will have only 7 digits.

To set the home area code:

1. Press MENU/SELECT in idle mode to enter the main menu.

2. Use qCID or pDIR to scroll to >Settings, then press

MENU/SELECT.

3. Use qCID or pDIR to scroll to >Home area code, then

press MENU/SELECT. The screen briefly shows

Only for 7digit dial from CID.

4. Use the dialing keys to enter a three-digit home area code.

Press X/DELETE to delete a digit.

Press and hold X/DELETE to delete all digits.

5. Press MENU/SELECT to save. There is a confirmation tone and the screen

shows Area code will not show in CID briefly before returning to the

previous menu.

NOTE: If in the future, your telephone service provider requires you to dial 10 digits to

make a local call (area code plus telephone number), you need to delete your home

area code and dial out locally from the caller ID log. With the home area code displayed,

press and hold X/DELETE until the digits are deleted, and then press MENU/SELECT.

The home area code is now restored to its default setting of _ _ _ (empty).

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you

must change the dial mode to pulse dialing before using the telephone.

To set the dial mode:

1. Press MENU/SELECT in idle mode to enter the main menu.

2. Use qCID or pDIR to scroll to >Settings, then press

MENU/SELECT.

3. Use qCID or pDIR to scroll to >Dial mode, then press

MENU/SELECT.

4. Use qCID or pDIR to highlight >Tone or >Pulse, then

press MENU/SELECT. There is a confirmation tone and

the screen returns to the previous menu.

•

HOME AREA CODE

___

CID time sync

>Home area code

Home area code

>Dial mode

DIAL MODE

>Tone