User`s manual

Telephone operation

Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific device or any

device without notifying them.

To transfer an outside call from a handset:

1. During the call, press MENU/SELECT.

2. Press MENU/SELECT to choose >Transfer.

If you have one handset, the outside call is put on

hold and your handset shows Transferring call... The

telephone base rings and shows Transfer from HANDSET.

If you have more than one handset, your screen shows

TRANSFER TO: Use the dialing keys to eenter a specific

device number (0 for the telephone base, 1-9 for

handsets 1-9, TONE followed by 0-2 for handsets

10-12, or TONE followed by # for all devices), or

press qCID or pDIR to scroll to the desired device and

press MENU/SELECT. The outside call is put on hold

and your handset screen shows Transferring call... or

Transferring call to all... The other device rings and

shows Transfer from HANDSET X (HANDSET represents

the handset name, X represents the handset number).

3. To answer the call on the destination handset, press, press PHONE/FLASH

or /SPEAKERSPEAKER. To answer the call on the telephone base, lift the, lift the

corded handset or press /SPEAKERSPEAKER. The initiating handset shows

Call transferred and goes to idle mode.

•

>Transfer

Intercom

TRANSFER TO:

>Handset 2

Phone 0:00:12

6:30

8/06