User`s manual

Telephone operation

Options while on calls

To transfer an outside call from the telephone base:

1. During the call, press MENU/SELECT.

2. Press MENU/SELECT to choose >Transfer.

If your have one handset, the outside call is put on

hold and the telephone base shows

Transferring call... The handset rings and shows

Transfer from BASE 0 (BASE represents the

base name).

If you have more than one handset, the telephone

base shows TRANSFER TO: Use the dialing keys to

enter a specific handset number (1-9 for handsets

1-9, TONE followed by 0-2 for handsets 10-12, or

TONE followed by

for all handsets), or press qCID

or pDIR to scroll to the desired handset and press MENU/SELECT. The

outside call is put on hold and the telephone base shows Transferring

call... or Transferring call to all... The other handset(s) rings and shows

Transfer from BASE 0 (BASE represents the base name).

3. To answer the call on the destination handset, press, press PHONE/FLASH or

/SPEAKERSPEAKER. The telephone base shows Call transferred and goes to

idle mode.

NOTES:

To cancel the transfer and return to the external call before the blind transfer call is

answered, press OFF/CANCEL, PHONE/FLASH or /SPEAKER on your handset, or

CANCEL or /SPEAKER on your telephone base.

If the other device does not answer the transfer within 30 seconds, the transfer ends and the

initiating device rings while showing No response to transfer. If it does not pick up within 30

seconds, the device returns to idle mode and the outside call ends.

•

06:30

8/06

Speaker 0:00:12

>Transfer

Intercom

TRANSFER TO:

>Handset 2