User`s manual

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets, or a

handset and the telephone base. You can buy additional expansion handsets

(model AT&T CL80111) for this telephone base to expand your telephone

system (up to 12 handsets).

Using a cordless handset:

Press MENU/SELECT in idle mode to enter the main menu. Press qCID or

pDIR to scroll to >Intercom, then press MENU/SELECT.

If you have one handset, the handset shows Calling base.

If you have more than one handset, the handset shows

INTERCOM TO: Use the dialing keys to eenter a specific

device number (0 for the telephone base, 1-9 for

handsets 1-9, TONE followed by 0-2 for handsets

10-12, or TONE followed by

for all devices), or press

qCID or pDIR to scroll to the desired device and press

MENU/SELECT. Your handset screen shows Calling

HANDSET X, Calling BASE 0 or Calling all devices.

The destination device(s) rings and shows HANDSET is

calling, HANDSET X is calling or HANDSET X is calling all

(HANDSET represents the handset name, X represents the

handset number).

2. To answer the intercom call, press PHONE/FLASH,

/SPEAKERSPEAKER or any dialing key (0-9, TONE , or

) on the

called cordless handset. Or on the called telephone base,

press /SPEAKERSPEAKER or any dialing key (0-9, TONE , or

), or

lift the corded handset. Both devices now show Intercom.

3. To end the intercom call, one party presses OFF/CANCEL or places the

cordless handset back in the charger, presses CANCEL on the telephone

base, or hangs up the corded handset. The other party hears four beeps.. The other party hears four beeps. The other party hears four beeps.

Both devices display Intercom ended.

•

Calling

BASE 0

HANDSET X

is calling

Intercom

12/02 11:35