User`s manual

Multiple handset use

Push-to-talk (PTT)

Using the telephone base:

1. There are a few ways to begin a PTT call to a single handset. When the

telephone base is not in use:

If you have one handset, press and hold PTT.

If you have more than one handset:

w Press PTT. Then use the dialing keys to enter the

destination handset number.

-OR-

w Press qCID or pDIR to highlight the destination

handset number. Then press MENU/SELECT or PTT.

The telephone base shows Connecting to HANDSET X...

(HANDSET represents the handset name, X represents

the destination handset number)

for a few seconds. When

the connection is made, both the telephone base and

destination handset display Press and hold [PTT] to talk.

2. Press and hold PTT. A chirp indicates your microphone

is on. Speak towards the telephone base. Your voice is

broadcast to the destination handset.

While you are speaking, the telephone base shows PTT

To handset: X.

3. Release PTT after speaking. Both devices beep once

again and the screens show Press and hold [PTT]

to talk. Then you can press and hold PTT to continue speaking or the

destination device can respond (see Answer a PTT call on page 47).

4. To end the PTT call, press CANCEL. The telephone base shows

Push to talk Ended for a few seconds.

•

PTT To

handset: X

Connecting to

Handset X...

Press and hold

[PTT] to talk

PUSH TO TALK

>Handset X