User`s manual

Multiple handset use
48
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and
the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on the
initiating handset or /SPEAKER on the initiating telephone base. The
PTT call ends automatically and the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on any one
of the destination handsets, or press /SPEAKER on the destination
telephone base. That device answers the outside call. The PTT call
continues for the rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base.
The telephone continues to ring.
Make an outgoing call during a PTT call
During the PTT call, press PHONE/FLASH on your handset or /SPEAKER
on your telephone base to get a dial tone. The PTT call ends automatically.
During the PTT call, press PHONE/FLASH on the initiating handset
or /SPEAKER on the initiating telephone base. The PTT call ends
automatically and you get a dial tone.
During the PTT call, press PHONE/FLASH on any one of the destination
handsets or press /SPEAKER on the destination telephone base. That device
gets a dial tone. The PTT call continues for the rest of the PTT participants.
End or leave a PTT call
The initiating device can end the PTT call. If any one of the destination devices
leaves the PTT call, the call continues until all participants or the initiator hangs up.
Press OFF/CANCEL on the handset or place the handset in the charger, or
press CANCEL on the telephone base. The screen shows Push to talk Ended.
NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the
PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or
PTT on the telephone base within 10 seconds, the PTT call ends automatically.
•
•
•
•
•
•
•
Push-to-talk (PTT)
Press PHONE/FLASH or any dialing key (0-9,
#
or TONE ) on the destination
handset, or press /SPEAKER or any dialing key (0-9,
#
or TONE ) on the
telephone base or lift the corded handset to answer. Both devices show Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the charger, or press CANCEL on the telephone base. Both
screens show Intercom ended.
3.
4.