User`s manual

Directory
50
Create directory entries
Create a new directory entry
Using a cordless handset or the telephone base:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to >Directory, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to >Add contact, then press
MENU/SELECT.
4. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press qCID or pDIR to move the cursor to the left
or right.
Press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a digit.
Press and hold MUTE/DELETE on the handset or
X/DELETE on the telephone base to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE then qCID,
pDIR or pressing REDIAL/PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
The display shows Number already saved if the number is already in
the directory. You cannot save the same number twice.
6. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Each time you press a key, the character on that key appears. Additional
key presses produce other characters on that key. See the chart on the
following page.
Press qCID or pDIR to move the cursor to the left
or right.
Press 0 to add a space.
Press MUTE/DELETE on the handset or X/DELETE on
the telephone base to erase a character.
Press and hold MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase all characters.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word
start as lower case letters as shown in the chart below.
•
•
•
•
•
•
•
•
•
ENTER NAME
Robert Brown_
ENTER NUMBER
888-883-2445 _
Review
>Add contact
p
q
Answering sys
>Directory
p
q