User`s manual

Answering system
79
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause, stop or delete the message.
When messages are playing on the telephone base:
Press q/VOLUME/p to adjust the message playback volume.
Press EQ to adjust the message playback audio quality.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press twice to hear the previous
message.
Press X/DELETE to delete the message.
Press /PLAY/STOP to stop the playback.
Press /SPEAKERSPEAKER to stop playback. The screen shows Call back?, then press
MENU/SELECT, or /SPEAKERSPEAKER to call back the caller if the caller’s number is
available. If the dialing format used is not correct, then use the option below
to choose the correct dialing format before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information
if available. From here, you can press CANCEL to resume playback.
Or press # (pound key) repeatedly to show the desired dialing option
(page 63), then press /SPEAKERSPEAKER or MENU/SELECT to call back the caller.
If you do not call back within 10 seconds, message playback resumes
automatically.
When messages are playing on the handset:
Press qCID/VOLUME or pDIR/VOLUME to adjust the message playback volume.
Press EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press MUTE/DELETE to delete the message.
Press 5 or OFF/CANCEL to stop the playback.
Press /SPEAKERSPEAKER to switch between speakerphone mode and handset mode.
Press PHONE/FLASH to stop playback. The screen shows Call back?,
then press MENU/SELECT, PHONE/FLASH, or /SPEAKERSPEAKER to call back
the caller if the caller’s number is available. If the dialing format used
is not correct, then use the option below to choose the correct dialing
format before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information
if available. From here, you can press OFF/CANCEL to resume playback.
Or press # (pound key) repeatedly to show the desired dialing option
(page 63), then press PHONE/FLASH or /SPEAKERSPEAKER to call back the
caller. If you do not call back within 10 seconds, message playback
resumes automatically.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•