User`s manual

Appendix
91
Screen display messages
Screen messages
Number already
saved
The telephone number you have entered is already in the
directory.
Not available
at this time
Someone else is already using the directory or caller ID history.
No Incoming PTT
The incoming PTT function is turned off. The handset will not
receive PTT calls.
Out of range OR
No pwr at base
The telephone base has lost power, or the handset is out
of range.
** Paging **
The cordless handset is paged by the telephone base.
Paging all
handsets
The telephone base is paging all cordless handsets.
Phone
The handset or telephone base is on a call.
Place in charger
The battery is very low. The handset should be charged.
Rec mem full
The system recording memory is full.
Rec mem low
The system recording time is running short.
Recording message
The telephone is recording a message.
Registering...
Please wait
Handset registration is in progress.
Registeration
slots are full
The telephone base has the maximum of 12 handsets
registered to it.
Registration failed
The handset registration is not successful.
Ringer off
The ringer is turned off.
Ringer muted
The ringer is off temporarily while the device is ringing.
Saved
An entry has been successfully saved in the directory.
Speaker
The handset or telephone base speakerphone is in use.
TRANSFER TO:
You have started transferring a call, and need to enter the
desired device number or choose all devices.
To register,
see manual.
Screen display before handset registration.
To screen call,
press [SELECT]
Press MENU/SELECT to activate call screening on the handset.
Unable to call.
Line in use
Failed phone call (the telephone line is in use).
Unable to call.
Try again
You try to join a call when there are already four handsets on that call.
You try to make an outside call when another device is
transferring a call with the intercom feature.
XX Missed calls
There are new calls in the caller ID history.
XX New messages
There are new messages in the answering system.