User’s manual CL80115 DECT 6.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 23-25 of this manual. For complete instructions, please refer to the manual provided with your CL82115/CL82215/CL82315/ CL82415/CL82465/CL82515/CL83215/CL83315/CL83365/CL83415/ CL83465/CL83565/CL84115/CL84215/CL84265/CL84365 telephone. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual CL80115 DECT 6.
User’s manual CL80115 DECT 6.0 expansion handset for use with AT&T models CL82115/CL82215/CL82315/CL82415/CL82465/ CL82515/CL83215/CL83315/CL83365/CL83415/ CL83465/CL83565/CL84115/CL84215/CL84265/ CL84365 Table of contents Getting started Installation.............................................................................................................................. 1 Quick reference guide.....................................................................................................
Getting started Installation You must install and charge the battery before using the telephone. STOP! See pages 6-8 for easy instructions. Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Getting started Quick reference guide CHARGE light On when the handset is charging in the telephone base or charger. DIR/volume • Press to scroll up while in menus. • Press to increase the listening volume. • Press to show directory entries when the handset is not in use. • When entering names or numbers in the directory, press to move the cursor to the right. REDIAL/PAUSE • Press repeatedly to view the last ten numbers dialed. • While entering numbers, press and hold to insert a dialing pause.
Getting started Quick reference guide CID/volume • Press to scroll down while in menus. • Press to decrease the listening volume. • Press to show the caller ID log when the handset is not in use. • While entering names or numbers in the directory, press to move the cursor to the left. menu/select • Press to display the menu. • Once in the menu, press to select an item or save an entry or setting. OFF/CANCEL • During a call, press to hang up.
Getting started Quick reference guide Handset side view PUSH TO TALK • Press to initiate a one-to-one or one-to-group broadcast. • Press and hold to broadcast to a group of system devices. Main menu Main menu The > symbol highlights a menu item.
Getting started Charger installation Install the charger, as shown below. Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapter is intended to be correctly oriented in a vertical or floor mount position.
Getting started Battery installation and charging Install the battery, as shown on page 7. Once you have installed the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 37 for battery operating times.
Getting started Battery installation and charging Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the orientation of the engraved label. Insert the supplied battery with the label this side up facing up, as indicated. Bat BT1 ter WA 62 DO RN 34 NE NO ING Mad PA T B U S e in IN R C Chi INÉ na /F Ba IS SI BT tte ry DE WA 1833 Pack UP DO RN 42/BT / Blo / CE ING NE NO c-p CÔ / 28 Ma PAS T BU AVER 3342 iles TÉ de INC RN VE TIS (2.
Getting started Battery installation and charging To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions to install and charge a new battery. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time.
Registration and deregistration Adding and registering handsets Before using a new CL80115 handset, you must register it with the AT&T CL82115/CL82215/CL82315/CL82415/CL82465/ CL82515/CL83215/CL83315/CL83365/CL83415/CL83465/ CL83565/CL84115/CL84215/CL84265/CL84365 telephone system (purchased separately). The telephone system can support up to 12 handsets. The handsets provided with your telephone system are already registered as HANDSET 1, and so forth.
Registration and deregistration Adding and registering handsets 3. The IN USE light on the telephone base turns on. The handset shows Registering... Please wait. When the registration is successful, the handset shows HANDSET X Registered (HANDSET represents the handset name, X represents the handset number) and you hear a confirmation tone. The IN USE light turns off. The handset is now registered with the telephone base. If the registration fails, the system will automatically try to register again.
Registration and deregistration Adding and registering handsets Register a handset to your telephone base for AT&T models CL84115/CL84215/CL84265/CL84365 1. Before you begin registration, put the handset near the telephone base. Make sure the handset is out of the charger and shows To register HS, see manual. 2. On the telephone base, press MENU/SELECT in idle mode. 3. On the telephone base, press qCID or pDIR to scroll to Settings, then press MENU/SELECT. 4.
Registration and deregistration Deregistering handsets You may need to deregister your handsets if: • You have 12 registered handsets and need to replace a handset. -OR• You wish to change the designated handset number of your registered handsets. You must first deregister ALL the handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the instructions on this page before beginning the deregistration process.
Registration and deregistration Deregistering handsets • • • NOTES: If the deregistration fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handset(s) if any other system handset is in use. Even if the battery is depleted, you can still deregister the handset by following the steps mentioned on the previous page.
Appendix Troubleshooting If you have difficulty with your phone, please try the following suggestions. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The handset registration is unsuccessful. • Follow the handset registration instructions to register the handset again (see Adding and registering handsets on pages 9-10). My telephone doesn’t work at all. • Make sure the power cord is securely plugged in.
Appendix Troubleshooting • If changing the telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Try using a different wall jack in your home to connect your CL82115/CL82215/CL82315/CL82415/CL82465/CL82515/ CL83215/CL83315/CL83365/CL83415/CL83465/CL83565/ CL84115/CL84215/CL84265/CL84365 telephone, or��������� contact your telephone service provider (charges may apply). I cannot dial out. • Try all the suggestions mentioned above.
Appendix Troubleshooting • Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Out of range OR No pwr at base appears on my cordless handset. • Ensure you plug the telephone base in properly and the power is on. • Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.
Appendix Troubleshooting I get noise, static, or weak signals even when I’m near the telephone base. • If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters.
Appendix Troubleshooting My cordless handset does not ring when I receive a call. • Make sure that the ringer is not off. Refer to Ringer volume in the user’s manual provided with your CL82115/CL82215/ CL82315/CL82415/CL82465/CL82515/CL83215/CL83315/ CL83365/CL83415/CL83465/CL83565/CL84115/CL84215/ CL84265/CL84365 telephone. • Make sure you plug the telephone line cord securely into the telephone base and telephone jack. Make sure you plug in the power cord securely.
Appendix Troubleshooting My calls cut in and out while I’m using my cordless handset. • Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. • Do not install this phone near a microwave oven or on the same electrical outlet. You might experience decreased performance while the microwave oven is operating.
Appendix Troubleshooting System does not receive caller ID when on a call. • Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. • Make sure your computer is powered on.
Appendix Troubleshooting The charge light is off. • Make sure you plug the power and line cords in correctly and securely. • Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. • Clean the cordless handset, charger and telephone base charging contacts each month with a pencil eraser or cloth. • The battery may not be connected to the handset or is missing completely.
Appendix Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water • You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Appendix Important safety information CAUTIONS: • • • Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Appendix Important safety information The RBRC® Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickelmetal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1-800-8-BATTERY® for locations accepting spent Ni-MH batteries.
Appendix For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation.
Appendix For C-UL compliance • • • • • Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation (pages 6-8). N’incinérez pas et ne percez pas les piles — elles contiennent des produits chimiques caustiques. L’adaptateur de courant est conçu pour être orienté verticalement ou installé sur le plancher. Les broches ne sont pas conçues pour se maintenir en place si la fiche est branchée dans une prise de courant au plafond, sous la table ou sous une armoire.
Appendix For C-UL compliance • • Piles rechargeables : Ce produit comporte des piles rechargeables à l’hydrure métallique de nickel. Usez de prudence lorsque vous manipulez de telles piles et veillez à ne pas les court-circuiter avec des matériaux conducteurs, tels que des bagues, bracelets et clés. La pile ou le conducteur peut surchauffer et vous brûler. Respectez la polarité adéquate entre les piles et le chargeur de piles.
Appendix For C-UL compliance Spécifiquement en rapport avec les répondeurs téléphoniques Enregistrement deux voies : Cet appareil n’émet pas de bips d’avertissement qui permettent de prévenir l’autre partie que vous enregistrez la conversation. Pour assurer votre conformité aux règlements fédéraux ou provinciaux en rapport avec les enregistrements des conversations téléphoniques, vous devriez informer l’autre partie lorsque vous activez l’enregistrement.
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Appendix FCC Part 68 and ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening.
Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. (For CL84115/CL84215/CL84265/ CL84365, only the telephone functions on the cordless handsets will be disabled.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 1.
Appendix Limited warranty • PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or • PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or • PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or • PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of Americ
Appendix Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties.
Appendix Technical specifications RF frequency band 1921.536MHz - 1928.448MHz Channels 5 Handset voltage 2.4VDC - 3.2VDC Handset battery 2.4V 400mAh, 2xAAA Ni-MH Charger voltage (AC adapter output) 6VDC @ 100mA Operation Operating time* Talk time (cordless handset) Up to 7 hours Talk time (cordless handset speakerphone) Up to 5 hours Standby Up to 7 days * Operating times vary depending on your actual use and the age of the battery. DECT 6.
www.telephones.att.com © 2015-2017 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. RBRC® and 1-800-8-BATTERY® are registered trademarks of the Rechargeable Battery Recycling Corporation. Printed in China. Issue 2.0 AT&T 03/17.
