User Manual
Table Of Contents
- Technical specifications
- Limited warranty
- California Energy Commission battery charging testing instructions
- FCC Part 15
- FCC Part 68 and ACTA
- For C-UL compliance
- Especially about cordless telephones
- Precautions for users of implanted cardiac pacemakers
- Pacemaker patients
- ECO mode
- Especially about telephone answering systems
- Important safety information
- Maintenance
- Troubleshooting
- Deregistering handsets
- Adding and registering handsets
- Battery installation and charging
- Charger installation
- Quick reference guide
- Installation
8
Getting started
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
Aer you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
Aer that, it will prompt if you want to set up
the answering system via voice guide (only for
CL82115/CL82215/CL82315/CL82415/CL82465/
CL82515 telephone system). Press MENU/SELECT
to start. For details, see the corresponding
sections in the telephone system’s user’s manual.
To skip these settings, press
OFF/CANCEL.
Battery installation and charging
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Li out the old battery and
disconnect it from the handset. Follow
the instructions to install and charge a
new battery.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Setup Ans sys?