User Manual
Table Of Contents
- Technical specifications
- Limited warranty
- California Energy Commission battery charging testing instructions
- FCC Part 15
- FCC Part 68 and ACTA
- For C-UL compliance
- Especially about cordless telephones
- Precautions for users of implanted cardiac pacemakers
- Pacemaker patients
- ECO mode
- Especially about telephone answering systems
- Important safety information
- Maintenance
- Troubleshooting
- Deregistering handsets
- Adding and registering handsets
- Battery installation and charging
- Charger installation
- Quick reference guide
- Installation
10
Registration and deregistration
3. The IN USE light on the telephone base turns on. The handset
shows Registering... Please wait. When the registration is
successful, the handset shows HANDSET X Registered (HANDSET
represents the handset name, X represents the handset number)
and you hear a confirmation tone. The IN USE light turns off. The
handset is now registered with the telephone base.
If the registration fails, the system will automatically try to register
again. If registration fails aer the third try, Registration Failed
appears on both screens. The handset shows To register HS, see
manual and the telephone base returns to idle mode. This may
take up to ve minutes to occur. Please start again from Step 1.
NOTES:
You cannot register a handset if any other system handset is in use.
You can only register one handset to the telephone base at a time.
•
•
Adding and registering handsets